Parts for Techsew 5100

Package of 10 needles. Made in Japan.Needle System: 7x3 (744R,DYx3)Needle Point: R (Round point)Application: Leather (light, medium, heavy), nylon ...

The Techsew 5100 Special Edition is the ultimate sewing machine designed for sewing a wide range of leather products and thick and heavy materials...

Package of 6 aluminium bobbins for Techsew 5100, 4100, 180, 180-2. Not for use in Techsew 5100 machines purchased before June 2016. Contact us for...

The center groover presser foot is compatible with all Techsew 5100 and Techsew 4100 presser feet. It features a groove beneath the foot which will...

Needle thread guide pin for Techsew 5100, 2750

The Techsew 5100 leather stitcher is the ultimate sewing machine designed for sewing a wide range of leather products. Light range leather work: Pu...

Techsew 5100, 4100 Shuttle Hook

Piping foot compatible with Techsew 4100, 5100, 5100-25, 5200. The inside and outside foot have a groove cutout for sewing piping or cording into u...

The right toe presser foot is a narrow toe foot that provides the most visibilty around the presser foot and allows you to sew along the edge of yo...

The left side presser foot is a narrow foot that provides increased visibilty around the presser foot and allows you to sew along the edge of your ...

Wide presser foot set for Techsew 5100 and 5100SE. Interior and exterior feet included. These presser feet have teeth on the bottom for better grip...

The left toe presser foot is a narrow toe foot that provides the most visibilty around the presser foot and allows you to sew along the edge of you...

Replaces the standard needle plate and requires the feed dog to be removed. Raised approximately 3/8" (9.5 mm) above the machine bed, the holster n...

Feedog with Teeth for Techsew 5100 - Part #ZQ441909

The double toe presser foot is a double narrow toe presser foot with smooth bottom and will not mark your leather. Features: Increased vsibiliy ar...

Shuttle driver and shaft for Techsew 5100

Feed Dog (No Teeth) for Techsew 5100

Replaces the standard needle plate and requires the feed dog to be removed. Unlike raised specialty plates, the slotted needle plate sits ...

Standard inside presser foot with teeth for Techsew 5100

Table Mounted Bobbin Winder for Techsew 5100

Replaces the standard needle plate and requires the feed dog to be removed. Raised up to 1/2" (12.7 mm) above the machine bed, the rounded profile ...

Techsew 5100 Presser Bar Spring (low tension)

Needle plate setscrew for Techsew 5100 (package of 3)